Entering The Department Id And Password - Canon CLC5151 Reference Manual

Entering the Department ID and Password

If Department ID Management has been set, the Department ID and password must be entered
before using this machine.
NOTE
• For instructions on setting the Department ID and password, see "Department ID Management," on
p. 6-6.
• If you are using a control card for Department ID management, the message <You must insert a control
card.> appears on the touch panel display. Insert the control card into the card slot. (See "Card
Reader-D1," on p. 9-18.)
• The use of some functions may be restricted, and a screen asking you to enter your Department ID and
password or insert your control card may appear while you are using the machine. Follow the
instructions on the touch panel display to continue using the selected function.
• If you are using a MEAP application to manage user authentication, and SDL or SSO is set as the login
service, the following procedure is not necessary. (See "Using a Login Service," on p. 2-32.)
1
Use
Press [Dept. ID]
Press [Password]
If no password has been set, proceed to step 2.
The numbers that you enter for the password are displayed as asterisks (*******).
- (numeric keys) to enter your Department ID and password.
enter your Department ID.
enter the password.

Entering the Department ID and Password

2
2-29