Finisher-W1/Saddle Finisher-W2 (Optional) - Canon CLC5151 Reference Manual

10
Reconnect the finisher to the main unit.
CAUTION
When reconnecting the finisher to the main unit, be careful not to get your fingers
caught, as this may result in personal injury.
NOTE
If there are no staples ready for stapling after the finisher is reconnected to the main unit, the
stapler unit automatically performs a "dry" stapling operation to reposition the staples.

Finisher-W1/Saddle Finisher-W2 (Optional)

If a staple jam occurs in the stapler unit of the optional Finisher-W1 or optional Saddle
Finisher-W2, a screen similar to the one shown below appears on the touch panel display.
Check the location of the staple jam, and follow the procedure described below, and the
procedure that appears on the touch panel display, to remove any jammed staples.
IMPORTANT
Make sure to close all covers and drawers of the machine before clearing any staple jams.
Clearing Staple Jams
8
8-65