Entering a Department ID and PIN
Enter your Department ID and PIN to log in when the screen shown in step 1 is
displayed.
IMPORTANT
This log-in method is available only when "Authentication to the Machine" (p. EN-3) is
applied as the authentication mode.
NOTE
To log in to the machine, you must have a valid department ID and PIN (if set)
registered. For more information, see the documentation included with the uniFLOW
software.
1
Enter Dept. ID & PIN
Login: Press ID
Logout: Press ID
Dept. ID:
PIN:
Dept. ID
0123456
(Apply: Press OK)
PIN
*******
(Apply: Press OK)
2
Press [
EN-13
Logging in to the Machine
] (Log In/Out).
Enter your department ID and
PIN (up to 7 digits respectively)
using the numeric keys.
❑
Select <Dept. ID> using [ ] or [ ] and
press [OK].
❑
Enter your department ID and press
[OK].
❑
On the screen shown in step 1, select
<PIN> using [ ] or [ ] and press [OK].
❑
Enter your PIN and press [OK].
The PIN that you enter for the PIN is
displayed as asterisks (*******).