Output Tray Designation - Canon CLC5151 Reference Manual

2

Output Tray Designation

You can designate the machine's output trays to be used for specific functions.
4
The output trays indicated by Tray A, B, and C vary according to the attached optional
equipment.
Options Attached
Optical finisher is not attached
Finisher-W1 or Saddle Finisher-W2
NOTE
The same output tray can be designated for multiple functions.
4-38
Specifying Common Settings
Select [Low] or [High]
Details of each item are shown below.
[Low]: Energy consumption in the Sleep mode is low, but it takes longer to recover from the
Sleep mode.
[High]: Energy consumption in the Sleep mode is high, but it takes shorter to recover from the
Sleep mode.
NOTE
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds for the
touch panel to be displayed after pressing the control panel power switch.
Finisher-X1
press [OK].
You can change the output tray indicated by Tray C by pressing
[Specify Tray C].
Tray A/B/C