Saddle Stitcher Unit (Optional) - Canon CLC5151 Reference Manual

7

Saddle Stitcher Unit (Optional)

If a staple jam occurs inside the saddle stitcher unit of the optional Saddle Finisher-W2, a
screen similar to the one shown below appears on the touch panel display. Check the location
of the staple jam, and follow the procedure described below, and the procedure that appears on
8
the touch panel display, to remove any jammed staples.
8-68
Clearing Staple Jams
Close the front cover of the finisher.
The Optional Saddle Finisher-W2
CAUTION
When closing the front cover of the finisher, be careful not to get your fingers caught,
as this may result in personal injury.
NOTE
If there are no staples ready for stapling after the cover is closed, the stapler unit automatically
performs a "dry" stapling operation to reposition the staples.
The Optional Finisher-W1