Aaa For Ppp Users By An Hwtacacs Server - HP 6600 Security Configuration Manual

# Enable the Telnet server on the device.
[Router] telnet server enable
# Configure the router to use AAA for Telnet users.
[Router] user-interface vty 0 4
[Router-ui-vty0-4] authentication-mode scheme
[Router-ui-vty0-4] quit
# Create local user named telnet.
[Router] local-user telnet
[Router-luser-telnet] service-type telnet
[Router-luser-telnet] password simple aabbcc
[Router-luser-telnet] quit
# Configure the AAA methods for the ISP domain as local authentication and authorization.
[Router] domain system
[Router-isp-system] authentication login local
[Router-isp-system] authorization login local
[Router-isp-system] quit
2. Verify the configuration.
A user can Telnet to the user interface of the router by using username telnet@system and correct
password.
# Use the display connection command to view the connection information on Router.
[Router] display connection
Index=1
IP=192.168.1.58
IPv6=N/A
Total 1 connection(s) matched.

AAA for PPP users by an HWTACACS server

Network requirements
As shown in
provide authentication, authorization, and accounting services for PPP users.
Set the shared keys for secure HWTACACS communication to expert. Configure the router to send
usernames without domain names to the HWTACACS server.
Figure 14 Network diagram
,Username=telnet@system
Figure 14, configure the router to use the HWTACACS server to assign IP addresses and
59