Table of Contents
Advertisement
Specifying a track number
You can use the remote's numeric keys (
specify the number of the track you want to play.
1
Use the remote's numeric keys (
number (maximum of three digits).
Enter the track number starting with the highest digit.
•
To specify track 1
Press the
1
key once.
•
To specify track 12
Press the
key ∑
key.
1
2
•
To specify track 103
Press the
1
key ∑
0
key ∑
2
Press the
PLAY
key.
Fast-forward/rewind search
You can rapidly search forward or backward while
listening to the audio of a track.
1
Play or pause the desired track.
2
Hold down the ˚ or ∆ key.
Fast-forward or rewind search will begin.
Time search
While the unit is stopped, playing, or paused, you can
locate to a specified time in the specified track.
NOTE
You can't use time search when the play mode is program
mode or random mode.
1
Use the remote's numeric keys (
digits in the following order.
Track number: three digits
•
Elapsed time from the beginning of the track
•
(
hours /
minutes /
XX
XX
For example if you want to locate to 1 minute 30 seconds
from the beginning of track 2, you would press the keys in
the following order.
0
0
2
0
0
0
∑
∑
∑
∑
∑
Time searching from an incomplete entry
If you press the remote's
ENTER
READY
key) before you finish entering all nine digits
(to the seconds place), the unit will locate to the position
you've specified so far. For example if you enter "0 ∑
0 ∑ 2 ∑ 0 ∑ 0 ∑ 1 ∑ 2" and press the
the recorder will locate to a position 12 minutes from the
beginning of track 2.
After the locate operation, the unit will either play or
pause, depending on the status prior to pressing the
key. If you press the
key, playback will begin. If you
PLAY
press the
key, the recorder will pause.
READY
) to directly
0–9
) to enter a track
0–9
3
key.
) to enter nine
0–9
seconds): two digits each
XX
1
3
0
∑
∑
∑
key (or the
PLAY
or
ENTER
key,
ENTER
5 − Playback
The selected track will begin playing.
Alternatively, you can use this procedure but press the
remote's
READY
key instead of the
at the beginning of the selected track.
NOTE
As an alternative to press the
•
the MULTI JOG dial to playback the file selected (or
the remote's ENTER key).
You can't use the numeric keys to specify the track
•
while in program or random mode.
3
To stop searching, release the key you were holding.
You will return to the state (either playing or paused) in
which you were prior to searching.
When you finish entering the nine digits, the SS-R1/
SS-R05 will automatically locate to the specified position.
If the unit is stopped or playing back prior to the locate
operation, playback will begin after the locate operation. If
the unit is paused prior to the locate operation, it will pause
after the locate operation.
NOTE
If you specify a track number that does not exist in the
current play area, or a time that does not exist in the
track, the operation will be cancelled at that point.
NOTE
This method allows you to omit the leading 0 of the
•
last place you enter (track, hour, minute, second), even
the leading 00 of the track number. For example if you
want to locate to minute 2 of track 2, press "0
2" and press the ENTER key.
2
∑
0
∑
0
∑
If you enter only the track number and press the
•
ENTER key (or the PLAY key or READY key), the
result is the same as "Specifying the track number"
(page 23).
TASCAM SS-R1/SS-R05
PLAY
key to pause
PLAY key, you can press
0
∑
∑
23
Advertisement
Table of Contents
