Table of Contents
Advertisement
2 - Quick Guide
Creating a new song
1. When the recorder is stopped, press the MENU button to
open the
screen.
MENU
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight)
the F4 (t) button.
The
screen appears.
SONG LIST
3. Press the F4 (t) button to open the sub-menu and then
use the JOG/DATA dial or the CURSOR (5/b) buttons to
select
.
CREATE
4. Press the F4 (t) button to open the
pop-up window.
The created song is given the name
5. Change the name (title) of the song as necessary in the item
. (See "Editing names" on page 30.)
Name
6. Use the CURSOR (5/b) buttons to move the cursor (blue
highlight) to select
(Bit rate),
Bit
and then use the JOG/DATA dial to set.
12
TASCAM DP-24SD
, and then press
SONG
SONG CREATE
.
SONG_0002
(Sampling frequency),
Hz
7. Press the F2 (
) button.
YES
The currently loaded song is saved and a new song is
created.
8. Press the HOME button to return to the Home screen.
Connecting and setting the input sources
1. Connect an electric guitar to the MIC/LINE INPUTS H jack on
the rear panel.
Guitar
2. Set the LINE-GUITAR switch to GUITAR on the rear panel.
The GUITAR indicator lights.
Now the guitar becomes the input source for INPUT H.
TIP
When connecting an electric-acoustic guitar with a built-in
preamp or an active-type electric guitar, or when using an
effects pedal, for example, between the guitar and this unit,
set the LINE-GUITAR switch to LINE on the rear panel.
GUITAR indicator
Advertisement
Table of Contents
