Table of Contents
Advertisement
Applying equalization
8
In this example, we will use the equalizer on the master file to
reduce high frequencies and increase low frequencies slightly.
1. When Recorder mode is
Mastering
(
) button to open the
EQ
EQUALIZER
2. Turn the EQ HIGH knob to the left to lower the
for
shown on the screen. Set to "
HIGH
the high frequencies.
3. Next turn the EQ MID knob to the left to lower the
. Set to "
". This reduces the mid frequencies.
MID
-2dB
4. Next, turn the EQ LOW knob to the right to raise the
knob for
shown on the screen. Set to "
LOW
increase the low frequencies.
5. Press the ON/OFF button on the right of the LOW knob to
turn the equalizer on.
6. Press the F1 (g) button to return to the Mastering screen.
7. Now you can press the PLAY (7) button to listen to the
master file with equalization.
8
Use the compressor on the master file to adjust the impact of
the entire song.
mode, press the F1
1. When Recorder mode is
screen.
2. Press the F3 (
knob
GAIN
". This reduces
-2dB
for
GAIN
GAIN
". This
+6dB
3. Use the JOG/DATA dial to select (blue highlight) an item
4. Press the F4 (
5. Press the F1 (g) button to return to the Mastering screen.
6. Press the PLAY (7) button on the Mastering screen to listen
2 - Quick Guide
Applying compression
Mastering
(
) button to open the
COMP
) button to open the library list.
LIBRARY
from the list and then press the F4 (t) button to load the
appropriate setting from the library.
The library list closes.
TIP
You can also adjust the parameters on the
screen using the CURSOR buttons and JOG/DATA dial.
) button to turn the compressor on.
ON
The indication
changes to
OFF
to the master file with compression.
NOTE
If the
item is set to
on the
EQ
ON
effect of the equalizer on the sound will also be heard.
mode, press the F2
screen.
COMP MULTI
COMP MULTI
.
ON
screen, the
EQUALIZER
17
TASCAM DP-24SD
Advertisement
Table of Contents
