Creating A New Song; Saving A Song - Tascam DP-24SD Owner's Manual

Creating a new song

Follow the procedure below to create a new song.
1. When the recorder is stopped, press the MENU button to
open the screen.
MENU
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight)
the F4 (t) button.
The screen appears.
SONG LIST
3. Press the F4 (t) button to open the corresponding
sub-menu.
Use the JOG/DATA dial or the CURSOR (5/b) buttons to
select from the sub-menu, and then press the F4
CREATE
(t) button.
4. Press the F4 (t) button to open the
pop-up window.
The created song is given the name depending on the
setting of
Song Name Type
menu.
5. Change the song name in the
"Editing names" on page 30.)
TIP
You can edit the name of a song later selecting
from the screen. You can also edit the song
EDIT SONG
name when saving the song.
6. Align the cursor with
Bit
set the bit rate. (Default: 16bit)
7. Align the cursor with and turn the JOG/DATA dial to set
Hz
the sampling frequency. (Default: 44.1kHz)
8. Press the F2 (
) button to save the currently loaded song
YES
and create a new song.
NOTE
If you press the F1 ( ) button, the pop-up window disap-
NO
pears and the display returns to the
9. Once the song is created, the pop-up window disappears
and the display returns to the
10. 10. Press the HOME button to return to the Home screen.
, and then press
SONG
SONG CREATE
on the
PREFERENCE
item if you want. (See
Name
NAME
and turn the JOG/DATA dial to
screen.
SONG LIST
screen.
SONG LIST
5 - Song Management

Saving a song

This unit automatically saves the current song during shutdown
and when loading another song. You can also save a song at any
time using the procedure below.
1. When the recorder is stopped, press the MENU button to
open the screen.
MENU
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight)
the F4 (t) button.
The screen appears.
SONG LIST
3. Press the F4 (t) button to open the corresponding
sub-menu.
Use the JOG/DATA dial or the CURSOR (5/b) buttons to
select from the sub-menu, and then press the F4 (t)
SAVE
button.
4. Press the F4 (t) button to open the
window.
5. Change the song name in the
(See "Editing names" on page 30.)
To save without changing the name, just press the F2 (
button.
6. Once the song is saved, the pop-up window disappears and
the display returns to the
SONG LIST
7. Press the HOME button to return to the Home screen.
TIP
The item, which is one of the
SAVE
sub-menus, can also be selected through the F2 (
button on the Home screen.
, and then press
SONG
pop-up
SONG SAVE
item if you want.
SongName
)
YES
screen.
SONG LIST
)
SAVE
31
TASCAM DP-24SD