Table of Contents
Advertisement
ASSIGN button/indicator
h
Use this button to set (assign) the input (INPUT A to H)
for each track. When you press this button, the Assign
screen opens. The input signal of the assigned input source
becomes the recording source. (See "Assigning inputs" on
page 35.)
MIXER button/indicator
j
Press this button to open the Mixer screen.
On this screen, you can adjust the settings for the inputs
(INPUT A to H) or tracks (including GROUP) that are selected.
(See "Bouncing tracks" on page 43.)
DYNAMICS button/indicator
k
Pressing this button opens a screen to adjust the settings
for the effects applied to the inputs (INPUT A to H). (See
"Dynamic effects" on page 53.)
EFFECT button/indicator
l
Pressing this button opens a screen to make adjustments
in the effects. (See "Guitar effects" on page 53 and "Send
effects" on page 54.)
MENU button
;
Press this button to open the
structure" on page 24.)
HOME button
z
Press this button to open the Home screen. (See "Home
screen" on page 23.)
F1 to F4 (Function) buttons
x
The functions of these buttons depend on the screen
currently displayed. The functions currently assigned to the
F1 to F4 buttons are shown at the bottom of the screen.
PAN knob
c
Use this knob to adjust the stereo position of the track's
playback signal or the input signal assigned to that track.
(See "Stereo position (panning)" on page 55.)
SEND EFF 1/EFF 2 knobs
v
Use these knobs to adjust the output of the EFFECT SENDS
jacks.
You can also use the SEND EFF 1 knob to adjust the internal
effects. (See "Sending signals to internal/external effects" on
page 38.)
SEND MASTER 1/MASTER 2 knobs
b
Use these knobs to adjust the output of the EFFECT SENDS
jacks.
You can also use the SEND MASTER 1 knob to adjust the
internal effects. (See "Sending signals to internal/external
effects" on page 38.)
CURSOR (5/b/g/t) buttons
n
Use these buttons to move the cursor on the screen.
JOG PLAY button
m
Press this button to switch to the Search mode.
3 – Names and Functions of Parts
screen. (See "Menu
MENU
SOLO button/indicator
,
Press this button to switch to the Solo mode (the button
lights). (See "Solo" on page 39.)
MUTE button/indicator
.
Press this button to switch to the Mute mode (the button
lights). (See "Muting tracks" on page 39.)
TRACK EDIT button
/
Press this button to open the
"8 - Track Editing" on page 49.)
VIRTUAL TRACK button/indicator
!
The
screen appears. (See "Virtual
VIRTUAL TRACK
tracks" on page 48.)
BOUNCE button/indicator
@
Press this button to switch to the Bounce mode (the button
lights). (See "Bouncing tracks" on page 43.)
MIXDOWN/MASTERING button/indicator
#
Press this button to switch the Recorder mode among
,
Multi Track
Mixdown
• In
mode, press this button to switch to
Multi Track
the
mode.
Mixdown
• In
mode, press this button to switch to the
Mixdown
mode when there is a master file, or press
Mastering
it to return to the
Multi Track
no master file.
• In
mode, press this button to return to the
Mastering
mode.
Multi Track
NOTE
The current mode is displayed on the Home screen.
METRONOME button/indicator
$
Press this button to set the metronome.
The button flashes according to the set tempo/beat. (See
"Metronome" on page 61.)
UNDO/REDO button/indicator
%
Press this button to undo the immediately previous action
(single undo) or cancel a single undo (redo). (See "Undoing
an operation" on page 40.)
After a single undo or multi-undo, the UNDO/REDO button
becomes lit, showing that an operation has been undone.
MONITOR SELECT button
^
Press this button to open the
window on the Home screen. (See "Monitor selection" on
page 36.)
screen. (See
TRACK EDIT
and
modes.
Mastering
mode when there is
pop-up
MONITOR SELECT
21
TASCAM DP-24SD
Advertisement
Table of Contents
