Table of Contents
Advertisement
10 - Mixing Down and Mastering Tracks
THRESHOLD
Set the threshold value that determines when the
compressor begins to operate.
RATIO
Set the compression ratio.
KNEE
Select the transition curve.
GAIN
Adjust the output level.
ATTACK
Adjust the attack time.
RELEASE
Adjust the release time.
AUTO MAKE
This feature automatically adjusts the volume to prevent it
from being reduced by the compressor.
6. When using the multi-band type, move the cursor to
and then use the JOG/DATA dial to adjust
CROSSOVER
the frequency range of each band.
7. Press the F4 (
) button to turn the compressor on
ON/OFF
or off. The ON or OFF state is shown on the
screen.
8. After setting the parameters, press the F1 (g) button to
return to the
Mastering
Compressor ON/OFF
60
TASCAM DP-24SD
Mastering
screen.
Using normalize
Use the normalize function to automatically adjust the volume.
This function detects the highest volume level and raises the
overall volume until the highest level reaches the maximum
limit.
CAUTION
If you use equalization or compression after normalizing the
track, distortion might occur.
Use the normalize function after adjusting the sound
quality with equalization and compression.
screen is displayed, press the F4
1. When the
Mastering
(
) button to open the
NORM
2. Press the F2 (
) button to perform the normalization.
YES
3. Once the normalization is completed, the display returns to
the
screen.
Mastering
Exiting Mastering mode
To exit
mode and return to
Mastering
mode, press the MIXDOWN/MASTERING button.
screen.
NORMALIZE
Multi Track
Advertisement
Table of Contents
