Dimms - HP ProLiant ML30 Gen9 Maintenance And Service Manual

Press and hold the fan latch, then remove the fan.
c.
To replace the component, reverse the removal procedure.

DIMMs

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power
input modules, and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the bezel
3.
Remove the access panel
4.
Remove the air baffle
5.
Open the DIMM slot latches.
6.
("Unlock and remove the
("Removing the access
("Air baffle" on page 28).
bezel" on page 26).
panel" on page 26).
Removal and replacement procedures 44