Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the access panel
3.
Remove the M.2 SSD enablement assembly
4.
Remove the SSD module.
5.
To replace the component, reverse the removal procedure.
Media bay blank
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the bezel
3.
("Removing the access
("Unlock and remove the
panel" on page 26).
("M.2 SSD enablement
bezel" on page 26).
Removal and replacement procedures 38
assembly" on page 36).