HP ProLiant ML30 Gen9 Maintenance And Service Manual page 31

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the bezel
3.
Remove all drives
4.
Remove the access panel
5.
Disconnect all cables connected to the drive cage backplane.
6.
Remove the drive cage.
7.
("Unlock and remove the
("Hot-plug drive" on page 30).
("Removing the access
bezel" on page 26).
panel" on page 26).
Removal and replacement procedures 31