Table of Contents
Advertisement
WPM System
USER GUIDE
Pole Mounting WPM with the Pole Mount and Universal Bracket
” Start with the MSX Passive subwoofer face down on its wheelboard. Rotate the four dropdown brackets located in the base
of the MSX Passive so they are protruding outwards.
Fig.34 - MSXP subwoofer
” Attach the Outrigger to the bottom of the MSX Passive cabinet by mating these dropdown brackets with the holes in the
baseplate box sections as shown. Use the front location as indicated on the baseplate membrane for this configuration (the
rear location is only needed for larger configurations). With the MSX Passive on its wheelboard and the front edge of the
Outrigger on the floor, the dropdown brackets should align with the correct holes. Secure all four dropdown brackets with
Rigging Pins.
Fig.36 - attach outrigger
WPM User Guide v1.0
Fig.35 - rotate dropdown brackets
Fig.37 - secure outrigger
Page 45
Advertisement
Table of Contents
