Table of Contents
Advertisement
WPM System
USER GUIDE
The coverage tab shows your 2D model with the planes refined into three types;-audience in green, non-audience in red and
hard avoid in blue. Each dot represents a virtual microphone position at which the software will take response measurements
using the integral computer model. The dots in the critical audience region are closer together for greater accuracy and are
spaced closer together at the start of the audience region to mirror how each region is covered by sections of the array. The
audience offset can be edited; standing, sitting or a custom offset of your choice and each region can be edited, perhaps
changing a section under a balcony from audience to non-audience for example.
The spl profile can be modified and the environmental conditions entered to allow the optimisation to compensate for air
absorption, particularly critical for outdoor events.
In the splay tab you can refine the quantity and position of the array before the system optimises the inter-cabinet splay angles
and the "aim" angle for the flying grid.
WPM User Guide v1.0
Page 15
Advertisement
Table of Contents
