Martin Audio WPM User Manual page 53

WPM System
USER GUIDE
” Wheel the second MSX Passive subwoofer into position so that its top face is aligned with the bottom face of the first
subwoofer. Extend the dropdown brackets from the bottom of the first subwoofer and engage them with the four slots in the
top of the second. Secure the dropdown brackets with Rigging Pins.
Fig.60 - attach second subwoofer
” Position the Transition Frame below the lowest of the suspended MSX Passive subwoofers. Attach the Transition Frame by
extending the dropdown brackets of the subwoofer and engaging them with the four slots in the top of the Transition frame.
Secure with four Rigging Pins.
Fig.62 - attach transition frame
WPM User Guide v1.0
Fig.61 - secure second subwoofer
Fig.63 - secure transition frame
Page 53