Table of Contents
Advertisement
WPM System
USER GUIDE
Ground Stacking WPM
Ground stacks of WPM cabinets are assembled using the touring Flying Frame. The front stabiliser bars provide a wide and
stable platform for assembling an array of up to six WPM cabinets.
” Place the ground stack bar at the desired location. Position the first cabinet on top of the bar, aligning the lower front rigging
points with the rigging points on the bar. Secure with Rigging Pins.
Fig.24 - insert rigging pin
” Rotate the rear of the cabinet upwards and fix it in position with the long or short GS bar as specified in the DISPLAY 2.3
project (long GS bar shown here).
Fig.26 - rotate cabinet
WPM User Guide v1.0
Fig.25 - insert rigging pin
Fig.27 - fit long GS bar
Page 42
Advertisement
Table of Contents
