Table of Contents
Advertisement
MLA MINI
USER GUIDE
PRESET 1: POLE MOUNT WITH UNIVERSAL OR FIXED TILT BRACKET
Step1: Start with the MSX sub face down on its wheelboard. Rotate the four dropdown brackets
located in the base of the MSX so they are protruding outwards. Attach the Ground Stack
Baseplate to the bottom of the MSX cabinet by mating these dropdown brackets with the holes
in the baseplate box sections as shown. Use the front location as indicated on the baseplate
membrane for this configuration (the rear location is only needed for larger configurations).
With the MSX on its wheelboard and the front edge of the Baseplate on the floor, the dropdown
brackets should align with the correct holes. Secure all four dropdown brackets with Flying Pins.
MLA Mini User Guide V1.0
Shown using the Fixed Tilt Bracket
25
Advertisement
Table of Contents
