Table of Contents
Advertisement
WPM System
USER GUIDE
Variable Height Pole
This is used to elevate an array of four WPM cabinets above the MSX Passive, SX118, or SX218 as a single assembly. The
height of the array can be set to that required according to the DISPLAY project by turning the handle, and then locked in
position with the integral clamp.
Long Ground Stack Bar
Short Ground Stack Bar
These precision alignment bars are used in conjunction with the touring Flying Frame to define the angle between the WPM
array and the Flying Frame when the system is configured for ground stacking. Two versions are available, long (Martin Audio
Part No. ASF20056) and short (ASF20057); the two sizes allow different ranges of angles to be set.
WPM User Guide v1.0
Page 32
Advertisement
Table of Contents
