Martin Audio WPM User Manual page 25

WPM System
USER GUIDE
WPM Connections
The WPM has two parallel-wired Neutrik® NL4 connectors on angled panels at the rear of the cabinet, recessed to avoid
damage. Connect speaker cables here, taking care to observe the colour coding of the connectors.
The two NL4s are wired in parallel so either can be used as a nominal 'input' or 'link' output. When the system is configured for a
single box resolution system each cabinet is connected to a single amplifier channel. In two box or higher resolution, connection
is made from an amplifier channel to the 'input' of one cabinet and the second 'link' NL4 is used to make a parallel connection
to an adjacent cabinet. The maximum is 4 box resolution with four cabinets connected to a single amplifier channel. Connection
goes to one cabinet with links between the three cabinets below in daisy-chain fashion going from link out to input on the next
cabinet.
WPM User Guide v1.0
Page 25