Default System Settings; Changeable Default Settings - Siemens Hicom Office PhoneMail Installation And System Administrator's Manual

9

Default System Settings

This chapter lists Office PhoneMail default system values, including:
Changeable default values.
Permanent system parameters.
Below, the term message used can refer to either:
A voice message.
A fax message.
A combined voice and fax message.
9.1

Changeable Default Settings

Table 9-1shows all of Office PhoneMail changeable default settings.
Setting Setting
Name Definitions
Fax ex- This value deter-
tension mines which exten-
setting sions are actually
configured to accept
incoming fax calls.
Auto- This setting deter-
matic mines whether Of-
mes- fice PhoneMail will
sage automatically de-
dele- lete messages older
tion af- than 21 days.
ter 21
days
Table 9-1 Office PhoneMail Changeable Default Settings (Sheet 1 of 6)
G281-0507-00, April 15, 1998
Hicom Office PhoneMail, Version 1, Installation and System Administration Guide
Office PhoneMail Changeable Default Settings
Default
Setting
No ex-
tension is
initially
config-
ured to
accept
fax calls.
Office
Phone-
Mail de-
fault set-
ting is to
delete
messag-
es after
21 days.
Valid
Options
You can configure Of-
fice PhoneMail with 0
or up to 2 fax ma-
chines. Fax machines
can be connected to
any Hicom analog ex-
tension ports.
You can toggle be-
tween enabled and
disabled automatic
message deletion.
lleg_sa.c09
Default System Settings
Changeable Default Settings
Where Impact
Covered
Chapter 8,
Fax exten-
"Changing
sions are
System
added or
Settings" .
removed
one at a
time.
Chapter 7,
Automatic
"Customiz-
message
ing Your
deletion is
System".
enabled or
disabled for
the entire
system.
9-1