Chapter 17 System Monitor
Table 73 Syslog Severity Levels (continued)
CODE
3
4
5
6
7
17.2 The Log Screen
Click System Monitor > Log to open the Log screen. Use the Log screen to see the system logs
for the categories that you select in the upper left drop-down list box.
Figure 119 System Monitor > Log
The following table describes the fields in this screen.
Table 74 System Monitor > Log
LABEL
Level
Refresh
Clear Logs
Export
Email Log Now
#
Time
Level
Messages
168
SEVERITY
Error: There is an error condition on the system.
Warning: There is a warning condition on the system.
Notice: There is a normal but significant condition on the system.
Informational: The syslog contains an informational message.
Debug: The message is intended for debug-level purposes.
DESCRIPTION
Select a severity level from the drop-down list box. This filters search results according to
the severity level you have selected. When you select a severity, the Device searches
through all logs of that severity or higher.
Click this to renew the log screen.
Click this to delete all the logs.
Click this to save a copy of the logs to your computer.
Click this to have the Device send the log to the email server you configured in the Log
Setting screen.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field displays the severity level of the logs that the device is to send to this syslog
server.
This field states the reason for the log.
AMG1312-T10D User's Guide