ZyXEL Communications AMG1312-T10D User Manual page 157

The following table describes the fields in this screen.
Table 68 Add/Edit Parental Control Rule
LABEL
General
Active
Parental Control Profile
Name
Home Network User
Internet Access Schedule
Day
Time of Day to Apply: (24-Hour Format)
Start Time
End Time
Time
Network Service
Network Service
Setting
Add new service
Active
Service Name
Protocol
Port
Modify
Blocked Site/URL
Apply
Cancel
AMG1312-T10D User's Guide
DESCRIPTION
Select the checkbox to activate this parental control rule.
Enter a descriptive name for the rule.
Select the LAN user that you want to apply this rule to from the drop-down list box.
If you select Custom, enter the LAN user's MAC address. If you select All, the rule
applies to all LAN users.
Select check boxes for the days that you want the Device to perform parental
control.
Enter the time period of each day, in 24-hour format, during which parental control
will be enforced.
Drag the time bar to define the time that the LAN user is allowed access.
If you select Block, the Device prohibits the users from viewing the Web sites with
the URLs listed below.
If you select Access, the Device blocks access to all URLs except ones listed below.
Click this to show a screen in which you can add a new service rule. You can
configure the Service Name, Protocol, and Name of the new rule.
Select the check box next to the service to apply this rule to the service. Clear the
check box to not apply this rule to it.
Select a service.
For services that support multiple protocols, select the protocol.
Specify the port number from 1 to 65535.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Specify web sites or URLs to which the Device blocks access.
Click this button to save your settings back to the Device.
Click this to exit this screen without saving.
Chapter 15 Parental Control
157