Dns Screen - ZyXEL Communications AMG1312-T10D User Manual

Chapter 25 Remote Management
Table 88 Maintenance > Remote MGMT > SNMP (continued)
LABEL
Apply
Cancel

25.6 DNS Screen

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa.
Use this screen to set from which IP address the Device will accept DNS queries and on which
interface it can send them your Device's DNS settings. This feature is not available when the Device
is set to bridge mode. Click Maintenance > Remote MGMT > DNS to change your Device's DNS
settings.
Figure 142 Maintenance > Remote MGMT > DNS
The following table describes the labels in this screen.
Table 89 Maintenance > Remote MGMT > DNS
LABEL
Server Port
Access Status
Secured Client IP
Address
Apply
Cancel
198
DESCRIPTION
Click Apply to save your changes back to the Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This displays the service port number for accessing the Device. If the number is grayed
out, it is not editable.
Select the interfaces through which a computer may send DNS queries to the Device.
A secured client is a "trusted" computer that is allowed to send DNS queries to the Device.
Select All to allow any computer to send DNS queries to the Device.
Choose Range to just allow the computers with an IP address in the range that you
specify to send DNS queries to the Device.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1312-T10D User's Guide