Display Gps - HP MSR series Command Reference Manual

display gps

Use display gps to display GPS information for an interface.
Syntax
display gps interface interface-type interface-number
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
This command is available only on the following routers:
JG596A
•
JG704A
•
JG665A
•
MSR routers with the SIC-4G-LTE module.
•
Examples
# Display GPS information for Cellular-Ethernet 1/0.
<Sysname>display gps interface Cellular-Ethernet 1/0
GPS info
------------------
GPS State: Enabled
GPS Mode Configured: Standalone
Latitude: 40 Deg 4 Min 43 Sec North
Longitude: 116 Deg 21 Min 32 Sec East
Timestamp (UTC): 08/20/2013
Local time: 08/20/2013
Heading: 270.35, Velocity Horiz: 0.00, Velocity Vert: 0.00
Height (MSL): 34.00 m
Satellite Info
------------------
Satellite ID: #4
Elevation: 51.00, Azimuth: 227.00, SNR: 34.70, Processing Status: track
Satellite ID: #8
Elevation: 18.00, Azimuth: 206.00, SNR: 26.20, Processing Status: track
Satellite ID: #9
Elevation: 14.00, Azimuth: 209.00, SNR: 30.00, Processing Status: track
Satellite ID: #1
Elevation: 47.00, Azimuth: 47.00, SNR: 0.00, Processing Status: search
Satellite ID: #7
Elevation: 47.00, Azimuth: 47.00, SNR: 0.00, Processing Status: search
07:15:48
15:15:48
88