HP MSR series Command Reference Manual page 233

Field
The Maximum Transmit Unit is 1500,
Hold timer is 10(sec)
Baudrate is 128000 bps, Timeslot(s)
Used: 1, 2
Internet Address is 6.6.5.5/24 Primary
Encapsulation is ISDN
Output queue : (Urgent queuing : Length)
100
Output queue : (Protocol queuing : Length)
500
Output queue : (FIFO queuing : Length)
75
Last clearing of counters: Never
Last 300 seconds input rate 0.00
bytes/sec, 0 bits/sec, 0.00 packets/sec
Last 300 seconds output rate 0.00
bytes/sec, 0 bits/sec, 0.00 packets/sec
Input: 0 packets, 0 bytes
0 errors, 0 runts, 0 giants
0 CRC, 0 align errors, 0 overruns
0 aborts, 0 no buffers
0 frame errors
Description
MTU of the BRI interface. The MTU defaults to 1500 bytes, and a
packet larger than the MTU is fragmented before it is sent. If
fragmentation is not allowed, the packet will be dropped.
Hold timer refers to the lifetime of a packet in a network. It is the
maximum amount of time that a packet can exist in the network
before being dropped. The hold timer of packets on the BRI
interface is set to 10 seconds.
Bandwidth and timeslot of the BRI interface.
IP address of the BRI interface.
Encapsulation protocol of the interface ISDN.
Urgent queuing specifies the maximum number of packets that can
stay in the queue.
Protocol queuing specifies the maximum number of packets that
can stay in the queue.
Packets with IP precedence 6 enter this queue.
FIFO queuing specifies the current number of packets in the first-in
first-out (FIFO) queue, maximum number of packets that can stay in
the queue.
Last time when the interface statistics is cleared.
Average input rate in the last 300 seconds.
Average output rate in the last 300 seconds.
Received statistics on the BRI interface:
•
broadcasts—Number of received broadcast packets.
•
multicasts—Number of received multicast packets.
•
errors—Number of error packets detected on the physical
layer.
•
runts—Number of undersized packets received on the
interface.
•
giants—Number of oversized packets received on the
interface.
•
CRC—Number of normal-sized packets with CRC errors
received on the interface.
•
align errors—Number of packets with alignment errors
received on the interface.
•
overruns—Number of packets dropped because the input rate
of the interface exceeded the queuing capability.
•
aborts—Number of packets that are not received successfully.
•
no buffers—Number of packets that are discarded because
the buffer runs out.
•
frame errors—Number of packets with frame errors.
224