Secondary Authorization - HP 5120 SI series Command Reference Manual

In FIPS mode, the key is a string of 8 to 373 characters.
• simple key: Sets a plaintext shared key. The key argument is case sensitive. If you specify neither this keyword
nor the cipher keyword, the shared key is set in plain text.
In non-FIPS mode, the key is a string of 1 to 255 characters.
In FIPS mode, the key is a string of 8 to 255 characters and must contain digits, uppercase
letters, lowercase letters, and special characters.
Description
Use the secondary authentication command to specify a secondary HWTACACS authentication server.
Use the undo secondary authentication command to remove secondary HWTACACS authentication
servers. If you specify an IP address, this command removes the secondary HWTACACS authentication
server using that IP address. If you do not specify an IP address, this command removes all secondary
HWTACACS authentication servers.
By default, no secondary HWTACACS authentication server is specified.
The IP addresses of the primary and secondary authentication servers cannot be the same. Otherwise,
the configuration fails.
The shared key configured by using the secondary authentication command takes precedence over the
one configured by using the key authentication [ cipher | simple ] key command.
The HWTACACS service port configured on the device and that of the HWTACACS server must be
consistent.
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an authentication server only when it is not used by any active TCP connection to send
authentication packets is using it.
Related commands: key, display hwtacacs, and hwtacacs scheme.
Examples
# Specify the IP address and port number of the secondary authentication server for HWTACACS
scheme hwt1 as 10.163.155.13 with TCP port number 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary authentication 10.163.155.13 49

secondary authorization

Syntax
secondary authorization ip-address [ port-number | key [ cipher | simple ] key ] *
undo secondary authorization [ ip-address ]
View
HWTACACS scheme view
Default level
2: System level
85