Reset Stop-Accounting-Buffer; Retry Stop-Accounting (Hwtacacs Scheme View) - HP 5120 SI series Command Reference Manual

Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all

reset stop-accounting-buffer

Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name [ slot slot-number ]
View
User view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a string of 1
to 32 characters.
slot slot-number: Specifies the member number of the device in the IRF virtual device, which you can
display with the display irf command. The value range for the slot-number argument depends on the
number of members and numbering conditions in the current IRF virtual device. If no IRF virtual device
exists, the slot-number argument is the current device number.
Description
Use the reset stop-accounting-buffer command to clear the buffered stop-accounting requests that get no
responses.
Related commands:
stop-accounting-buffer.
Examples
# Clear the buffered stop-accounting requests for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1

retry stop-accounting (HWTACACS scheme view)

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
Default level
2: System level
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts, in the range 1 to 300.
stop-accounting-buffer
82
enable, retry stop-accounting, and display