Scp Configuration Commands; Scp Client Configuration Commands; Scp - HP 5120 SI series Command Reference Manual

Hide thumbs Also See for 5120 SI series:
Table of Contents

Advertisement

SCP configuration commands

The switch supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.

SCP client configuration commands

scp

Syntax
In non-FIPS mode:
scp [ ipv6 ] server [ port-number ] { get | put } source-file-path [ destination-file-path ] [ identity-key { dsa
| rsa } | prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des |
aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
scp [ ipv6 ] server [ port-number ] { get | put } source-file-path [ destination-file-path ] [ identity-key rsa
| prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14
| prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] *
View
User view
Default level
3: Manage level
Parameters
ipv6: Specifies the type of the server as IPv6. If this keyword is not specified, the server is an IPv4 server.
server: Specifies an IPv4 or IPv6 server by its address or host name. For an IPv4 server, it is a
case-insensitive string of 1 to 20 characters. For an IPv6 server, it is a case-insensitive string of 1 to 46
characters.
port-number: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. The default is dsa.
dsa: Specifies the public key algorithm dsa.
rsa: Specifies the public key algorithm rsa.
prefer-ctos-cipher: Specifies the preferred encryption algorithm from client to server, defaulted to aes128.
3des: Specifies the encryption algorithm 3des-cbc.
aes128: Specifies the encryption algorithm aes128-cbc.
aes256: Encryption algorithm aes256-cbc.
des: Specifies the encryption algorithm des-cbc.
269

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents