Pki Request-Certificate Domain - HP 5120 SI series Command Reference Manual

Related commands: pki domain.
Examples
# Import the CA certificate for PKI domain cer in the format of PEM.
<Sysname> system-view
[Sysname] pki import-certificate ca domain cer pem

pki request-certificate domain

Syntax
pki request-certificate domain domain-name [ password ] [ pkcs10 [ filename filename ] ]
View
System view
Default level
2: System level
Parameters
domain-name: Specifies a PKI domain name, a string of 1 to 15 characters.
password: Specifies the password for certificate revocation, a case-sensitive string of 1 to 31 characters.
pkcs10: Displays the BASE64-encoded PKCS#10 certificate request.
filename filename: Specifies the name of the local file for saving the PKCS#10 certificate request, a
case-insensitive string of 1 to 127 characters.
Description
Use the pki request-certificate domain command to request a local certificate from a CA through SCEP.
If SCEP fails, you can use the pkcs10 keyword to save the local certificate request in BASE64 format and
send it to the CA by an out-of-band means like phone, disk, or email.
This operation will not be saved in the configuration file.
Related commands: pki domain.
Examples
# Display the PKCS#10 certificate request information.
<Sysname> system-view
[Sysname] pki request-certificate domain 1 pkcs10
-----BEGIN CERTIFICATE REQUEST-----
MIIBTDCBtgIBADANMQswCQYDVQQDEwJqajCBnzANBgkqhkiG9w0BAQEFAAOBjQAw
gYkCgYEAw5Drj8ofs9THA4ezkDcQPBy8pvH1kumampPsJmx8sGG52NFtbrDTnTT5
ALx3LJijB3d/ndKpcHT/DfbJVDCn5gdw32tBZyCkEwMHZN3ol2z7Nvdu5TED6iN8
4m+hfp1QWoV6lty3o9pxAXuQl8peUDcfN6WV3LBXYyl1WCtkLkECAwEAAaAAMA0G
CSqGSIb3DQEBBAUAA4GBAA8E7BaIdmT6NVCZgv/I/1tqZH3TS4e4H9Qo5NiCKiEw
R8owVmA0XVtGMbyqBNcDTG0f5NbHrXZQT5+MbFJOnm5K/mn1ro5TJKMTKV46PlCZ
JUjsugaY02GBY0BVcylpC9iIXLuXNIqjh1MBIqVsa1lQOHS7YMvnop6hXAQlkM4c
-----END CERTIFICATE REQUEST-----
234