Ead Fast Deployment Configuration Commands; Dot1X Free-Ip; Dot1X Timer Ead-Timeout - HP 5120 SI series Command Reference Manual

EAD fast deployment configuration commands

dot1x free-ip

Syntax
dot1x free-ip ip-address { mask-address | mask-length }
undo dot1x free-ip { ip-address { mask | mask-length } | all }
View
System view
Default level
2: System level
Parameters
ip-address: Specifies a freely accessible IP address segment, also called "a free IP."
mask: Specifies an IP address mask.
mask-length: Specifies IP address mask length.
all: Removes all free IP addresses.
Description
Use the dot1x free-ip command to configure a free IP. Users can access the segment before passing
802.1X authentication.
Use the undo dot1x free-ip command to remove the specified or all free IP addresses.
By default, no free IP is configured.
When global MAC authentication, Layer-2 portal authentication, or port security is enabled, the free IP
does not take effect.
Related commands: display dot1x.
Examples
# Configure 192.168.0.0/24 as a free IP address.
<Sysname> system-view
[Sysname] dot1x free-ip 192.168.0.0 24

dot1x timer ead-timeout

Syntax
dot1x timer ead-timeout ead-timeout-value
undo dot1x timer ead-timeout
View
System view
113