Retry - HP 5120 SI series Command Reference Manual

slot slot-number: Specifies the member number of the device in the IRF virtual device, which you can
display with the display irf command. The value range for the slot-number argument depends on the
number of members and numbering conditions in the current IRF virtual device. If no IRF virtual device
exists, the slot-number argument is the current device number.
Description
Use the reset stop-accounting-buffer command to clear the buffered stop-accounting requests for which
no responses have been received.
Related commands: stop-accounting-buffer enable, retry stop-accounting, user-name-format, and
display stop-accounting-buffer.
Examples
# Clear the buffered stop-accounting requests for user user0001@test.
<Sysname> reset stop-accounting-buffer user-name user0001@test
# Clear the buffered stop-accounting requests in the time range from 0:0:0 to 23:59:59 on March 31,
201 1.
<Sysname> reset stop-accounting-buffer time-range 0:0:0-03/31/2011 23:59:59-03/31/2011

retry

Syntax
retry retry-times
undo retry
View
RADIUS scheme view
Default level
2: System level
Parameters
retry-times: Maximum number of transmission attempts, in the range 1 to 20.
Description
Use the retry command to set the maximum number of attempts for transmitting a RADIUS packet to a
single RADIUS server.
Use the undo retry command to restore the default.
By default, the maximum number of RADIUS packet transmission attempts is 3.
Because RADIUS uses UDP packets to transmit data, the communication is not reliable. If the device does
not receive a response to its request from the RADIUS server within the response timeout period, it
retransmits the RADIUS request. If the number of transmission attempts exceeds the limit but the device
still receives no response from the RADIUS server, the device considers the request a failure.
The maximum number of packet transmission attempts multiplied by the RADIUS server response timeout
period cannot be greater than 75.
Related commands: radius scheme and timer response-timeout.
Examples
# Set the maximum number of RADIUS request transmission attempts to 5 for RADIUS scheme radius1.
57