Ldap-Server - HP 5120 SI series Command Reference Manual

Default level
2: System level
Parameters
ip-address: Configure the IP address of an entity.
Description
Use the ip command to configure the IP address of an entity.
Use the undo ip command to remove the configuration.
By default, no IP address is configured for an entity.
Examples
# Configure the IP address of PKI entity 1 as 1 1.0.0.1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] ip 11.0.0.1

ldap-server

Syntax
ldap-server ip ip-address [ port port-number ] [ version version-number ]
undo ldap-server
View
PKI domain view
Default level
2: System level
Parameters
ip-address: Specifies the IP address of the LDAP server, in dotted decimal format.
port-number: Specifies the port number of the LDAP server, in the range 1 to 65535. The default is 389.
version-number: Specifies the LDAP version number. The value can be 2 or 3 and the default is 2.
Description
Use the ldap-server command to specify an LDAP server for a PKI domain.
Use the undo ldap-server command to remove the configuration.
By default, no LDP server is specified for a PKI domain.
Examples
# Specify an LDAP server for PKI domain 1.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] ldap-server ip 169.254.0.30
228