Ike Configuration Commands; Authentication-Algorithm; Authentication-Method - HP 5120 SI series Command Reference Manual

IKE configuration commands

IKE configuration commands are available only for the switches in FIPS mode. For more information
about FIPS mode, see Security Configuration Guide.

authentication-algorithm

Syntax
authentication-algorithm sha
undo authentication-algorithm
View
IKE proposal view
Default level
2: System level
Parameters
sha: Uses HMAC-SHA1.
Description
Use the authentication-algorithm command to specify an authentication algorithm for an IKE proposal.
Use the undo authentication-algorithm command to restore the default.
By default, an IKE proposal uses the SHA1 authentication algorithm.
Related commands: ike proposal and display ike proposal.
Examples
# Set SHA1 as the authentication algorithm for IKE proposal 10.
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10] authentication-algorithm sha

authentication-method

Syntax
authentication-method { pre-share | rsa-signature }
undo authentication-method
View
IKE proposal view
Default level
2: System level
Parameters
pre-share: Uses the pre-shared key method.
351