Usb Charging - Barnes & Noble nook User Manual

USB charging

The first time you connect your nook to a personal computer, your nook should be
on. The computer will install USB drivers for the nook, and display a message that
this operation is in progress. It will also display a message when it completes installing
drivers. You can ignore these messages. They do not affect charging.
For USB charging, the device can be off, sleeping, or on.
Procedure
1 Power on your personal computer.
2 Plug the smaller end of the USB cable into the USB/charging port on your device.
3 Plug the larger end of the USB cable into a USB port on your computer. The USB cable
connections are shown in this drawing:
What happens now depends on power state your nook is in:
Off: Your nook charges.

Sleeping: Your nook charges. A popup prompt regarding accessing mass storage is

displayed behind the screensaver. You see the prompt when you wake your nook from
sleep.
On (including when the touch screen display is off): If the touch screen display is off, it

is turned on. Your nook charges. You are presented with a choice regarding accessing
mass storage.
When charging, the charging indicator LED to the left of the USB port lights up yellow-
orange. You can use your nook while it is charging.
nook User Guide 16