Table of Contents
Advertisement
Telephone operation
Telephone basic operation
The telephone comes programmed to use line 1 (default primary line)
for calls when you do not press a line key. When you answer a call, the
telephone automatically selects the ringing line.
Line indicators
Each of the four indicators on LINE 1-LINE 4 indicate the state of the
corresponding telephone line.
•
On when the corresponding line is in use.
•
Flashes slowly when the line is on hold.
•
Flashes slowly when there is an incoming auto attendant answering or
transferring call on the corresponding line.
•
Flashes rapidly when there is an incoming call or a transferring call on the
corresponding line.
Making a call
To make a call from the console:
1.
Lift the handset or press
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
2. Wait for a dial tone, then enter the telephone number. The screen displays
the elapsed time as you talk (in hours, minutes and seconds).
To end a call from the console:
•
Place the handset on the console to hang up.
-OR-
•
If you are using the speakerphone, press
NOTE: The elapsed time is not affected by accessing services from your telephone service provider.
SPEAKER.
SPEAKER to hang up.
40
Advertisement
Table of Contents
