Table of Contents
Advertisement
Create a new directory entry
Use the following steps to store a name and number in the directory.
1.
When the console is idle, press DIRECTORY.
2.
Press MENU
/SELECT
3.
Use the dialing keys to enter the name.
•
Press DELETE to delete a character.
•
Press and hold DELETE to delete all characters.
•
Press /REPEAT or /SKIP to move the cursor to the left or right.
4.
Press
SELECT to save. Use the dialing keys to enter the number.
MENU/
•
Press DELETE to delete a digit.
•
Press and hold DELETE to delete all digits.
•
Press /REPEAT or /SKIP to move the cursor to the left or right.
•
You can include a pause while storing a dialing sequence that requires
one during actual dialing. Press
SELECT. A P appears on the screen.
MENU/
•
Store a signal for switching to temporary tone signalling. If you
have dial pulse (rotary) service, this signal is required for some special
services. Press
A T appears on the screen. All numbers you enter after this will send
touch-tone signals during dialing.
•
You can store the flash signal required by some special services as part of a
dialing sequence. Press
SELECT. A F appears on the screen.
MENU/
5.
Press
/REPEAT or /SKIP to choose Done, then press
exit without making changes, press CANCEL.
Review directory entries
1.
When the console is idle, press DIRECTORY.
2.
Press
or
to browse through the directory. Entries appear
alphabetically by the first letter in the name.
3.
Press CANCEL to cancel an operation and return to idle mode.
to add an entry.
or
to choose Add Tone, then press
or
to choose Add Flash, then press
56
or
to choose Add Pause, then press
SELECT.
MENU/
SELECT. To
MENU/
Advertisement
Table of Contents
