AT&T MS2085 User Manual page 29

Getting started
System setup
If you want to switch from Auto set IP to Set static IP, you have to change disable
the auto IP setting first.
To disable the Auto set IP:
1. When the console is idle, press MENU
2. Press SELECT to choose System Setup.
MENU/
3. Press or to scroll to Network Setup. Press
SELECT.
MENU/
4. Press or to scroll to Auto set IP. Then press
SELECT.
MENU/
5. Press or to scroll to No. Press
SELECT. The main console
MENU/
To enable the Static IP:
1. When the console is idle, press MENU
2. Press SELECT to choose System Setup.
MENU/
3. Press or to scroll to Network Setup. Press
SELECT.
MENU/
4. Press or to scroll to Static IP. Then press
SELECT.
MENU/
5. The screen displays Enter static IP.
6. Use the dialing keys to enter a specific IP.
• Press DELETE to delete a character.
• Press and hold DELETE to delete all characters.
• Press /REPEAT or /SKIP to choose Add dot,
then press
Press /REPEAT or /SKIP to choose Done, then
press SELECT.
MENU/
7. There is a confirmation tone when a valid IP is
entered. The screen displays IP obtained:
XXX.XXX.X.X Check network info? Press
SELECT to read the network info, or press
MENU/
CANCEL to return to the main menu.
• If the IP entered is invalid, the screen displays IP is
invalid. briefly and then returns to the
Enter static IP screen.
SELECT to add a dot. to add a dot. .
MENU/
.
/SELECT
.
/SELECT
24
L1 L2 L3 L4
Network setup
>Auto set IP
Set static IP
L1 L2 L3 L4
Auto Set IP
Yes
>No
L1 L2 L3 L4
DHCP disabled.
Please set static
IP to this
extension now
L1 L2 L3 L4
Network setup
Auto set IP
>Set static IP
L1 L2 L3 L4
Enter static IP
192.168.1._