Table of Contents
Advertisement
Telephone operation
Call transfer
You can transfer a call to any other system telephone. Once you transfer a
call, it can be answered by any system telephone, not just at the extension
you called.
Blind transfer
While on a call, you can transfer a call directly without notifying the
desired extension:
1.
Press TRANSFER
2.
Press the one-touch key for the desired extension, refer to
touch entry on page 32.
-OR-
Press
or
to scroll to the desired extension, then press
to scroll to the desired extension, then press
3. The current line is put on hold. The destination handset rings and the call
is answered by pressing LINE 1-LINE 4. You hear a short tone from the
console. The outside call is automatically transferred to the
desired extension.
4. Put the corded handset on the console or press
-OR-
You can resume the call by pressing the corresponding flashing line key
LINE 1-LINE 4 before the desired extension answers the call.
You hear a
beep tone every 30 seconds
answered (To turn off the reminder beep, see Hold reminder on page 38).
NOTES:
1.
If the desired extension does not answer the intercom call within one minute, the extension rings as
an incoming call to remind the extension user.
2.
If the outside call is put on hold for 10 minutes, it is automatically transferred to the auto attendant.
The console returns to idle mode.
3.
on the console
while on a call:
for the desired extension, refer to To dial a one-
for the desired extension, refer to
SPEAKER to hang up.
when a transferred call has not been
52
press
SELECT.
MENU/
Advertisement
Table of Contents
