Table of Contents
Advertisement
Caller ID
Caller ID operation
Save a call history entry to the directory
1.
When in the call history, press
to save.
2.
Press MENU
/SELECT
3.
Press
SELECT. Use the dialing keys to edit the name.
MENU/
•
Press DELETE to delete a character.
•
Press and hold DELETE to delete all characters.
•
Press /REPEAT or /SKIP to move the cursor to the left or right.
4.
Press
SELECT to save. Use the dialing keys to edit the number.
MENU/
•
Press DELETE to delete a digit.
•
Press and hold DELETE to delete all digits.
•
Press /REPEAT or /SKIP to move the cursor to the left or right.
•
You can include a pause while storing a dialing sequence that requires
one during actual dialing. Press
SELECT. A P appears on the screen.
MENU/
•
Store a signal for switching to temporary tone signalling. If you
have dial pulse (rotary) service, this signal is required for some special
services. Press
A T appears on the screen. All numbers you enter after this will send
touch-tone signals during dialing.
•
You can store the flash signal required by some special services as part of a
dialing sequence. Press
SELECT. A F appears on the screen. Continue storing the number
MENU/
as usual.
4.
Press
/REPEAT or /SKIP to choose Done, then press
exit without making changes, press CANCEL.
NOTE: You will need to change how a caller ID number is dialed if the entry does not
appear in the correct format. Caller ID numbers might appear with an area code that might
not be necessary for local calls, or without a 1 that might be necessary for long distance
calls (see View dialing options on the previous page for more information).
or
, then press
or
or
to choose Add Tone, then press
or
to choose Add Flash, then press
63
to browse the desired number
to choose Copy to DIR.
or
to choose Add Pause, then press
SELECT.
MENU/
SELECT. To
MENU/
Advertisement
Table of Contents
