Changing The Engine Oil - Yamaha STAR XVS95CE 2DX1 2014 Service Manual

b
a
Recommended brand
YAMALUBE
Type
SAE 10W-30, 10W-40, 10W-50,
15W-40,
20W-40 or 20W-50
Recommended engine oil grade
API service SG type or higher,
JASO standard MA
0 10 30 50 70 90 110
SAE 10W-30
SAE 10W-40
SAE 10W-50
SAE 15W-40
SAE 20W-40
SAE 20W-50
–20 –10 0 10 20 30 40 50 ˚C
ECA1TP1015
NOTICE
• Engine oil also lubricates the clutch and the
wrong oil types or additives could cause
clutch slippage. Therefore, do not add any
chemical additives or use engine oils with a
grade of CD or higher and do not use oils la-
beled "ENERGY CONSERVING II" or high-
er.
• Do not allow foreign materials to enter the
crankcase.
5. Start the engine, warm it up for several min-
utes, and then turn it off.
6. Check the engine oil level again.
TIP
Before checking the engine oil level, wait a few
minutes until the oil has settled.
7. Install:
• Dipstick
EAS20780

CHANGING THE ENGINE OIL

1. Start the engine, warm it up for several min-
1
2. Place a container under the engine oil drain
3. Remove:
• Dipstick "1"
• Engine oil drain bolt "2"
130 ˚F
4. Drain:
• Engine oil
5. If the oil filter cartridge is also to be replaced,
▼ ▼▼▼
a. Remove the oil filter cartridge "1" with an oil
3-22
PERIODIC MAINTENANCE
utes, and then turn it off.
bolt.
(along with the O-ring)
(along with the gasket)
(completely from the crankcase)
perform the following procedure.
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
filter wrench "2".
Oil filter wrench
90890-01426
YU-38411
1
1
2
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
2