Disabling The Command History Feature - Cisco Catalyst 2960-X Security Configuration Manual

Using the Command-Line Interface
DETAILED STEPS
Command or Action
Step 1
Ctrl-P or use the up arrow key
Step 2 Ctrl-N or use the down arrow key
Step 3 show history
Example:
Switch# show history

Disabling the Command History Feature

The command history feature is automatically enabled. You can disable it for the current terminal session or
for the command line. This procedure is optional.
SUMMARY STEPS
1. terminal no history
DETAILED STEPS
Command or Action
Step 1 terminal no history
Example:
Switch# terminal no history
Enabling and Disabling Editing Features
Although enhanced editing mode is automatically enabled, you can disable it and reenable it.
SUMMARY STEPS
1. terminal editing
2. terminal no editing
OL-29048-01
Purpose
Recalls commands in the history buffer, beginning with the most recent command.
Repeat the key sequence to recall successively older commands.
Returns to more recent commands in the history buffer after recalling commands
with Ctrl-P or the up arrow key. Repeat the key sequence to recall successively
more recent commands.
Lists the last several commands that you just entered in privileged EXEC mode.
The number of commands that appear is controlled by the setting of the terminal
history global configuration command and the history line configuration
command.
Purpose
Disables the feature during the current terminal session in
privileged EXEC mode.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Enabling and Disabling Editing Features
7