Example For Configuring Log Messages To Be Output To The Log Host On The Public Network When The Management Vpn Instance Is Used - Huawei Quidway S9300 Configuration Manual

Terabit routing switch v100r003c01
Table of Contents

Advertisement

2 Information Center Configuration
Information timestamp setting:
Sent messages = 683, Received messages = 682
IO Reg messages = 0 IO Sent messages = 0
----End
Configuration Files
#
sysname Quidway
#
info-center channel 6 name loghost1
info-center source FIB channel loghost channel 2 log level notification
info-center source IP channel 2 log level notification
info-center source PPP channel 6 log level warning
info-center source AAA channel 6 log level warning
info-center loghost source Vlanif10
info-center loghost 10.1.1.1 facility local2
info-center loghost 10.1.1.2 facility local2
info-center loghost 10.2.1.1 channel 6 facility local4
info-center loghost 10.2.1.2 channel 6 facility local4
#
vlan 10
#
interface Vlanif10
ip address 172.168.0.1 255.255.255.0
#
interface GigabitEthernet1/0/1
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
ip route-static 10.1.1.0 255.255.255.0 172.168.0.2
ip route-static 10.2.1.0 255.255.255.0 172.168.0.2
#Return
2.6.3 Example for Configuring Log Messages to Be Output to the
Log Host on the Public Network When the Management VPN
Instance Is Used
Output logs of multiple types and severity levels to different log hosts through information
channels.
Networking Requirements
As shown in
different log hosts through information channels.
switch sends the logs (with the severity level as notification) generated on the Forwarding
Information Base (FIB) module and the IP module to the log host Server 1. Server 3 functions
as a backup switch of Server 1.
switch sends the logs (with the severity level as warning) generated on the Point-to-Point
Protocol (PPP) module and the AAA module to the log host Server 1. Server 4 functions as a
backup switch of Server 2.
Both the switchs and the log hosts require to be configured.
A management VPN instance is configured on the switch.
2-38
log - date, trap - date, debug - boot
Figure
2-6, it is required to output logs of multiple types and severity levels to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Issue 01 (2010-12-15)

Advertisement

Table of Contents
loading

Table of Contents