Figure 2-2 Format Of The Output Logs - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Channel
Number
2
3
4
5
6
7
8
9
In the case of multiple log hosts, logs can be output through one channel or several channels.
For example, some logs can be output to a log host through Channel 2 (loghost) and some logs
can be output to another log host through Channel 6. To manage channels conveniently, you can
change the name of Channel 6.
Format of Logs
Syslog is a sub-function of the information center. It outputs information to a log host through
port 514.
Figure 2-2

Figure 2-2 Format of the output logs

Table 2-3
Issue 01 (2010-12-15)
Default
Channel Name
Loghost
Trapbuffer
Logbuffer
Snmpagent
Unspecified
Unspecified
Unspecified
Channel9
shows the format of logs.
<Int_16>TIMESTAMP HOSTNAME %%ddAAA/B/CCC(l):slot=XXX; YYYY
describes each field in a log message.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output Description
Direction
Log host Outputs logs, alarms, and debugging
information to the log host. Information is
saved to a log host in the file format for easy
reference.
Trap buffer Outputs alarms to the alarm buffer. The
switch assigns a specified area to be the
alarm buffer for recording alarms.
Log buffer Outputs logs to the log buffer. The switch
assigns a specified area to be the log buffer
for recording logs.
SNMP agent Outputs alarms to the SNMP agent.
Unspecified Reserved. This channel can output traffic a
user-defined direction.
Unspecified Reserved. This channel can output traffic a
user-defined direction.
Unspecified Reserved. This channel can output traffic a
user-defined direction.
Log file Outputs logs, alarms and debugging
information to the log file on the CF card
2 Information Center Configuration
2-5