Outputting Debugging Information To The Terminal - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Step 3 Enabling terminal display
1.
2.
----End

2.4.6 Outputting Debugging Information to the Terminal

When you log in to the device through a terminal, you can output debugging messages to the
terminal for query in real time.
Context
Do as follows on the switch configured with the information center:
Procedure
Step 1 Configuring Debugging Information to Be Output Through the Channel
1.
2.
Step 2 Configuring the Channel Through Which Debugging Information Is Output to the Terminal
1.
2.
Step 3 Enabling Terminal Display
1.
2.
Issue 01 (2010-12-15)
Run:
terminal monitor
Terminal display is enabled.
Run:
terminal debugging
Displaying debugging information on the terminal is enabled.
Run:
system-view
The system view is displayed.
Run:
info-center source { module-name | default } channel { channel-number | channel-
name } [ debug { state { off | on } | level severity } * ]
Debugging information is added to the information channel.
By default, the timestamp format of debugging information is date and the precision is
millisecond.
Run:
info-center monitor channel { channel-number | channel-name }
The channel through which debugging information is output to the terminal is configured.
Run:
quit
Back to the user view.
Run:
terminal monitor
Terminal display is enabled.
Run:
terminal debugging
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
2-29