Optional) Enabling The Information Center - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Pre-configuration Tasks
Before configuring the log output, complete the following tasks:
l
l
l
Data Preparation
To configure the log output, you need the following data.
No.
1
2
3
4
5
6

2.2.2 (Optional) Enabling the Information Center

By default, the information center is enabled. You can enable the information center in the event
that the information center is disabled.
Context
The information center classifies and outputs information. When it is heavily loaded with
information processing, the system performance is affected.
Do as follows on the switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center enable
The information center is enabled.
By default, the information center is enabled.
----End
Issue 01 (2010-12-15)
Connecting the switch to the PC properly
Ensuring that the route between the switch and the log host is reachable
Configuring an VPN instance
Data
l Channel number
l Channel name
Module name
Address of the log host
Severity level of the log
(Optional) Size of the log buffer
(Optional) VPN instance name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
2-9