Figure 2-3 Format Of The Output Alarms; Table 2-4 Description Of Each Field Of In An Alarm Message - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management

Figure 2-3 Format of the output alarms

Table 2-4

Table 2-4 Description of each field of in an alarm message

Field
TimeStamp
HostName
ModuleName
Severity
Brief
Description
Issue 01 (2010-12-15)
TimeStamp HostName ModuleName/Severity/BriefDescription
describes each field in an alarm message.
Indication
Time to send out the
information
Host name
Module name
Severity level
Brief information
Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
Description
Available formats for the timestamp are as follows:
l boot: The timestamp in this format indicates a
relative time.
l date: The timestamp in this format indicates the
system time. Timestamps in logs, alarms and
debugging information are in this format by
default.
l short-date: Unlike the date format, timestamps
in the short-date format do not indicate the year.
l format-date: The timestamp in this format is
another format of the system time.
l none: indicates that the information does not
contain any timestamp.
There is a space between the timestamp and the
host name.
By default, the name is Quidway.
There is a space between the sysname and module
name.
Indicates the name of the module that generates an
alarm.
Severity levels available for an alarm message are
as follows:
l Critical
l Major
l Minor
l Warning
l Indeterminate
l Cleared
Provides brief information of the alarms.
Provides detailed description of the alarms.
2-7