Enabling Alarm Output - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Information timestamp setting:
Sent messages = 2646, Received messages = 10395
IO Reg messages = 160 IO Sent messages = 7750
Run the display logbuffer [ level severity | size value | slot slot-id ]
in the log buffer.
<Quidway> display logbuffer
Logging buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 512
Channel number : 4 , Channel name : logbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 1
Feb 13 2007 20:05:46.523.1 Quidway %%01SHELL/4/CMDRECORD(l):task:vt0 ip:100.1.1.48
user:** command:info-center timestamp log date precision-time millisecond
Run the display info-center filter-id [ id ] command to check whether the log with the ID being
1098649600 is added into the filtering list.
<Quidway> display info-center filter-id 1098649600
ID
Module
Alias
Content
(TunnelName=[STRING], ErrorCode=[ULONG])
Filtered Number : 0
Run the display info-center filter-id command to check whether IDs of all logs are added into
the filtering list.
<Quidway> display info-center filter-id
ID
Module
Alias
Content
(TunnelName=[STRING], ErrorCode=[ULONG])
Filtered Number : 0

2.3 Enabling Alarm Output

This section describes how to output alarms of a specified module to the alarm buffer, log file,
console, terminal, or SNMP agent.
2.3.1 Establishing the Configuration Task
Before configuring the alarm output, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
2.3.2 (Optional) Enabling the Information Center
By default, the information center is enabled. You can enable the information center in the event
that the information center is disabled.
2.3.3 (Optional) Naming the Information Channel
Naming information channels helps you understand what is output by each channel.
2.3.4 Outputting Alarms to the Alarm Buffer
By default, alarms are output to the alarm buffer through a default channel. You can configure
alarms to be output through a specific channel.
Issue 01 (2010-12-15)
channel number : 9, channel name : channel9, language : english
log - date, trap - date, debug - boot
: 1098649600
: TE_TUNNEL
: NOTIFY_LSPM_FAIL
: LSPM return error to TE when processing tunnel commit event!
: 1098649600
: TE_TUNNEL
: NOTIFY_LSPM_FAIL
: LSPM return error to TE when processing tunnel commit event!
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
*
command to view the logs
2-17